IDM 50B
Multi-Standard Modem
IDM 50B
Multi-Standard Modem
FEATURES
- A programmable modem for SCADA or power utility communication network
- Multi-standard support: ITU R.35, R.37, R.38A, R.38B, V.21, V.23, V.29, Bell 103 and 202
- Fully programmable via Hayes AT command set
- Specialized Line, Power Line Carrier or radio communication
- Half or full-duplex operating mode
DESCRIPTION
IDM 50B is a frequency shift keyed (FSK) and quadrature amplitude modulation (QAM) modem for asynchronous and synchronous data transmission in 300-3400 Hz voice band. It is highly immune to interference and noise and permit extensive voice-band communication link utilization.
The modem supports several international standards ITU V.21, V.23, R.35, R.37, R.38A, R.38B, V.29, Bell 103, Bell 202 and proprietary Cegelec 1200/600Bd and Indactic 33 communication standards.
The modem can operate in half or full-duplex, point-to-point or point-to-multipoint mode. When using FSK modulation receive and transmit channels may be independently set.
The modem employs advanced DSP technology, thus offering high service flexibility through programmable features. Software configuration is performed via Hayes AT command set. AT commands can be initiated from any terminal application using ITU CCITT V.24 & V.28 (EIA RS-232C) communication interface. Additionally, for easy firmware upgrade a bootstrap loader is provided.
APPLICATION
IDM 50B is designed for use in SCADA systems mainly based upon power utility communication networks. Depending of modulation standard it can communicate through specialized, private or leased lines, radio links and power lines (PLC).
MOUNTING TYPES
IDM 50B is available as a desktop modem or in two different types of standard 19 inch rack:
- 1U rack with 1, 2 or 3 modems per rack;
- 3U rack with 10,12 or 14 modems per rack, and additional blank front plates covering unused slots.
All connectors at the rear side are accessible at the back openings.
TECHNICAL SPECIFICATION
Operation | |
---|---|
Type | Data transmission on audio frequency analog medium.
|
Media | Leased line, Radio, PLC
|
Modes | – Asyncronous or synchronous, Point-to-point, multipoint, 2-wire or 4-wire – Support for synchronous Indactic 33 protocol |
Standards | |||||
---|---|---|---|---|---|
FSK | Transmission rate Bd | Frequency deviation Hz | Channel
spacing
(bandwidth)
Hz | Channel mean frequency
adjustable in steps of 120Hz Lowest Hz | Channel mean frequency
adjustable in steps of 120Hz Highest Hz |
ITU R.35 | 50 | ± 30 | 120 | 420 | 3300 |
ITU R.37 | 100 | ± 60 | 240 | 4800 | 3120 |
ITU R.38B | 200 | ± 90 | 360 | 540 | 3060 |
ITU R.38A | 200/300 | ± 120 | 480 | 600 | 3480 |
ITU V.21 | 300 | ± 100 | 400 | 1080/1750 | 1080/1750 |
ITU V.23 /0/1/2/3/4/5 | 600/1200 | ± 200/400 | 800/1600 | 2850/1500/1700/1140/2850/1800
| 2850/1500/1700/1140/2850/1800
|
Bell 103 | 300 | ± 100 | 400 | 1170/2125
| 1170/2125
|
Bell 202 | 1200 | ± 500 | 2000 | 1700 | 1700 |
QAM | Transmission
rate
Bps | Symbol rate | Constellation
points | Carrier
frequency
Hz | Mode |
ITU V.29 | 4800 | 2400 | 4 | 1700 | Half duplex |
ITU V.29 | 7200 | 2400 | 8 | 1700 | Half duplex |
ITU V.29 | 9600 | 2400 | 16 | 1700 | Half duplex |
Interfaces | |
---|---|
DTE interface | – ITU CCITT V.24 & V.28 (EIA RS-232C), DB9 (female) connector – Signals: DCD, RD, TD, DTR, SG, DSR, RTS, CTS, RI – Character length: 5-9 data bits, 1 start, 1 stop – RTS/CTS delay: adjustable by 1ms step within range of 40-6825ms – Option to switch on fail relay if DCD off – Option to transmit on RTS – Configuration: AT command set |
Analog line | – DB15 (female) connector; – 600Ω or high impedance with return loss < 0.2; – Transmission level: 0 to -32dBm, programmable by 1dB step – Receive level: 0 to -40dBm, programmable by 1dB step, sensitivity min. – 48dBm – Radio control: half-duplex control and squelch detection |
Power supply | 2-position screw plug type (for 2-2.5mm2 wire)
|
General | |
---|---|
LED indication | PWR, TXD, RXD, RTS, DCD
|
Power supply | 9-18VDC, 9-12VAC , model -12 18-36VDC, 14-23VAC, model -24 36-60VDC, 25-50VAC, model -48 |
Isolation | Transformer up to 1500V
|
Immunity to noise | – Peak pulse noise: 100V Peak – Effective interference at 50 Hz: 80V rms |
Temperature | Operation and storage: -10° to +50 °C
|
Dimensions | – desktop: aluminium enclosure 112x30x170mm – 19” rack: EUROCARD PCB, 160x100mm 3HE, 6T in 1U and 3U rack |
ORDERING INFORMATIONS
Model
SKU
Description
Price
IDM-50B modem card
10131
Frequency shift keyed (FSK) and quadrature amplitude modulation (QAM) modem
€448.00
*Please note that all accessories are sold separately.
ORDERING INFORMATIONS
IDM-50B modem card
Frequency shift keyed (FSK) and quadrature amplitude modulation (QAM) modem
€448.00
ORDERING INFORMATIONS
IDM-50B modem card
Frequency shift keyed (FSK) and quadrature amplitude modulation (QAM) modem
€448.00
ACCESSORIES
ENCL-DESK-IDM
Desktop aluminium enclosure for IDM 50B
€47.00
ENCL-DIN35-H1
35mm DIN Rail Holder, Aluminium
€6.00
ENCL-MS-1U28HP-IDM
1U 28HP Mounting Set for IDM 50B, for 1U 84HP Mount Chassis
€22.00
ENCL-MS-3U6HP-BP
3U 6HP Mounting Set, Blank Plates, for 3U 84HP Mount Chassis
Price: €5
ENCL-MS-1U28HP-BP
1U 28HP Mounting Set, Blank Plates, for 1U 84HP Mount Chassis
€25.00
ENCL-MS-3U6HP-IDM
3U 6HP Mounting Set for IDM 50B, for 3U 84HP Mount Chassis
€30.00
PS-4830-3U6HP
3U 6HP Power Supply, DC48V 30W, AC88-264V, for 3U 84HP Mount Chassis
€173.00
PS-4805D-1U28HP
1U 28HP Power Supply, 2x DC48V 5W, AC85-264V, for 1U 84HP Mount Chassis
€138.00
ACCESSORIES
ENCL-DESK-IDM
Desktop aluminium enclosure for IDM 50B
€47.00
ENCL-DIN35-H1
35mm DIN Rail Holder, Aluminium
€6.00
ENCL-MS-1U28HP-IDM
1U 28HP Mounting Set for IDM 50B, for 1U 84HP Mount Chassis
€35.00
ENCL-MS-3U6HP-BP
3U 6HP Mounting Set, Blank Plates, for 3U 84HP Mount Chassis
€22.00
ENCL-MS-1U28HP-BP
1U 28HP Mounting Set, Blank Plates, for 1U 84HP Mount Chassis
€25.00
ENCL-MS-3U6HP-IDM
3U 6HP Mounting Set for IDM 50B, for 3U 84HP Mount Chassis
€30.00
PS-4830-3U6HP
3U 6HP Power Supply, DC48V 30W, AC88-264V, for 3U 84HP Mount Chassis
€173.00
PS-4805D-1U28HP
1U 28HP Power Supply, 2x DC48V 5W, AC85-264V, for 1U 84HP Mount Chassis
€138.00
ACCESSORIES
Model
SKU
Description
Price
ENCL-DESK-IDM
10156
Desktop aluminium enclosure for IDM 50B
€47.00
ENCL-MS-3U6HP-IDM
10137
3U 6HP Mounting Set for IDM 50B, for 3U 84HP Mount Chassis
€30.00
ENCL-MS-1U28HP-IDM
10138
1U 28HP Mounting Set for IDM 50B, for 1U 84HP Mount Chassis
€35.00
ENCL-DIN35-H1
20271
35mm DIN Rail Holder, Aluminium
€6.00
ENCL-MS-3U6HP-BP
10177
3U 6HP Mounting Set, Blank Plates, for 3U 84HP Mount Chassis
€22.00
ENCL-MS-1U28HP-BP
10180
1U 28HP Mounting Set, Blank Plates, for 1U 84HP Mount Chassis
€25.00
PS-4830-3U6HP
10178
3U 6HP Power Supply, DC48V 30W, AC88-264V, for 3U 84HP Mount Chassis
€173.00
PS-4805D-1U28HP
10321
1U 28HP Power Supply, 2x DC48V 5W, AC85-264V, for 1U 84HP Mount Chassis
€138.00
PRODUCT DOCUMENTS
Title | Categories | File Type | File Size | Link | hf:doc_categories | hf:file_type |
---|---|---|---|---|---|---|
IDM 50B – Datasheet | Datasheet | 257 KB | datasheet | |||
IDM 50B – User Manual | User Manual | 996 KB | user-manual |