GT900 110 - 343 - 686

Industrial GSM/GPRS device

GT900 110 - 343 - 686

Industrial GSM/GPRS device

FEATURES

Functionality of the following devices is available in three different platforms, 110, 343 and 686, with different hardware resources, shown in Table of hardware platforms.

Analog inputs can be configured to work as voltage or current inputsRelay outputs have large current capacityso they can be used to directly drive 220V consumers and they can also operate in pulse mode.

Devices can be configured by Decode GSM Utility free software through RS232 connection, and afterwards setup of device perimeters is possible. This device parameter setup can also be done via SMS.

SMS REPORTER

DESCRIPTION
SMS Reporter is industrial GSM/SMS telemetry device which uses GSM network for transferring commands, alarms and data by using SMS messages.

APPLICATION
SMS Reporter handles remote reading of analog and digital inputs and managing relay outputs by sending SMS message. Moreover, SMS reporter can be adjusted to send SMS messages on each state change of analogue and digital input. Each analogue and digital input has SMS table for up to 8 different SMS numbers.

GPRS ROUTER

DESCRIPTION
GPRS Router is industrial GSM/GPRS communication device which uses GSM network for transferring commands, alarms and data. Basic function of device is to manage transfer of industrial protocols over GPRS and to connect remote PLCs to SCADA programs over the VPN/GPRS network. Therefore, in addition to classic GPRS terminals, this device enables routing of fixed IP addresses and sending data from remote locations to center. Currently, GPRS Router supports Modbus and OMRON Hostlink protocols, but it can be adjusted to support other industrial protocols based on asynchronous serial communication. It is also possible to configure the device as MODBUS slave by allocating internal address.

APPLICATION
GPRS Router handles transfer of asynchronous serial data between two devices in point to point configuration, or between more than two devices in star configuration (replacement for master-slave RS485 network). Device can be configured to work as master or slave via command mode. Master can establish connections with slave modules by using dynamic route selection from routing table. Slave modules can have one or more fixed routes to master module (also placed in routing table), selectable by setting code combination on four digital inputs. By allocating internal address to slave device, internal MODBUS slave is activated. In other words, slave is then behaving like RTU.

GSM 110 ADDITIONAL OPTIONS

GSM KEY

DESCRIPTION
GSM Key is a GSM relay management device that uses GSM network for managing one relay output with free call. Managing of relay output is allowed to numbers defined in user list that can contain up to 200 GSM numbers.

APPLICATION
GSM key enables remote management by one free call using one relay output. Device can be configured to send SMS about status changes on digital input.

SMS GATEWAY

DESCRIPTION
SMS Gateway is industrial GSM/SMS communication device that uses GSM mobile network for distribution of commands, alarms and data, using SMS messages.

APPLICATION
SMS Gateway enables remote communication with remote control stations (equipped with PLC controller) by sending SMS messages. This enables remote management of control station, and, on the other side, it enables control station to notify users about changes of states and alarms. SMS Gateway can be adjusted to send SMS messages when state on digital input is changed. It is possible to enter up to 8 different numbers for digital input. Relay output can be managed by sending adequate SMS command.

*TABLE OF HARDWARE PLATFORMS

Platform
Relay outputs
Optocoupler inputs
Analog inputs
110
1
1
0
343
3
4
3
686
6
8
6

TECHNICAL SPECIFICATION

GSM
SIMCOM SIM900D
Quad-Band GSM/GPRS 850/900/1800/1900 MHz
Compliant with GSM phase 2/2+ standard
Output power
Class 4 (2W at 850/900MHz)
Class 1 (1W at 1800/1900MHz)
SIM card
Mini SIM, 1.8V/3.0V
Serial RS232 interface
DCE configuration, DB9 female
Serial baud rate in command mode
9600 bps, 8N1
Analog inputs
6/3/0* inputs with conjoint bulk, with adjustable software:
– current inputs 0-20mA or 4-20mA
– voltage inputs 0-5V or 0-10V
Digital inputs
8/4/1* inputs with conjoint bulk, separated with optocouplers
Nominal 12V DC – 24V DC max 30V DC
Logic 0 – Input voltage < 4V DC
Logic 1 – Input voltage >5V DC
Counting mode: 0 – 65535 pulses
Relay outputs
6/3/1* relays with NO contacts, 5A, 30V DC / 250V AC
Antenna connector
SMA female, GSM 50Ω antenna with 3m cable included
LED indication
Power ON, GSM ON, Ready, Busy
Power supply
DC power supply, from 8 to 30V
Power supply connector
Pluggable screw clamp 5mm, 2.5mm2
Power consumption
Standby 0.2W, max 3W
Dimension
35x85x58 mm; 70 x 85 x 58 mm; 105x85x58mm (without connection blocks)
Weight
cca 150g
Protection
IP40
Temperature range
-20°C to +75°C, 0 to 95% RH (non condensed)
Mounting
DIN 35mm rail

ORDERING INFORMATIONS

Model

SKU

Description

Price

GT900 - 110

10416

1 relay output, 1 digital input

165.00

GT900 - 343

10417

3 relay outputs, 4 digital inputs, 3 analog inputs

200.00

GT900 - 686

10418

6 relay outputs, 8 digital inputs, 6 analog inputs

250.00

*Minimum functionality kit needs to include the device and an appropriate power supply. Please note that all accessories are sold separately.

ORDERING INFORMATIONS

GT900 - 110

1 relay output, 1 digital input

165.00

GT900 - 343

3 relay outputs, 4 digital inputs, 3 analog inputs

200.00

GT900 - 686

6 relay outputs, 8 digital inputs, 6 analog inputs

250.00

ORDERING INFORMATIONS

GT900 - 110

1 relay output, 1 digital input

165.00

GT900 - 343

3 relay outputs, 4 digital inputs, 3 analog inputs

200.00

GT900 - 686

6 relay outputs, 8 digital inputs, 6 analog inputs

250.00

ACCESSORIES

ANT-GSM-R

GSM Rod antenna, 2.2 dBi, SMA, quad band

5.00

ANT-GSM-S

GSM Swivel antenna, 2.2 dBi, SMA, quad band

6.00

ANT-GSM-M

GSM antenna, Magnetic mount, cable 2.5m, 2.2 dBi, SMA, quad band

7.00

PS-1212-AD

AC/DC adapter, DC12V 12W, AC100-240V 50/60Hz

8.00

PS-2415-DIN

Power supply, DIN rail mount, DC24V 15W, AC85-264V 50/60Hz

11.00

CB-DB9MF-2M

Serial Cable Assembly 1.8~2m, DB9 Male to DB9 Female

4.00

ENCL-DIN35-H2

35mm DIN Rail Holder, Plastic

6.50

ACCESSORIES

ANT-GSM-R

GSM Rod antenna, 2.2 dBi, SMA, quad band

5.00

ANT-GSM-S

GSM Swivel antenna, 2.2 dBi, SMA, quad band

6.00

ANT-GSM-M

GSM antenna, Magnetic mount, cable 2.5m, 2.2 dBi, SMA, quad band

7.00

PS-1212-AD

AC/DC adapter, DC12V 12W, AC100-240V 50/60Hz

8.00

PS-2415-DIN

Power supply, DIN rail mount, DC24V 15W, AC85-264V 50/60Hz

11.00

CB-DB9MF-2M

Serial Cable Assembly 1.8~2m, DB9 Male to DB9 Female

4.00

ENCL-DIN35-H2

35mm DIN Rail Holder, Plastic

6.50

ACCESSORIES

Model

SKU

Description

Price

ANT-GSM-R

21760

GSM Rod antenna, 2.2 dBi, SMA, quad band

5.00

ANT-GSM-S

21757

GSM Swivel antenna, 2.2 dBi, SMA, quad band

6.00

ANT-GSM-M

23266

GSM antenna, Magnetic mount, cable 2.5m, 2.2 dBi, SMA, quad band

6.00

PS-1212-AD

10261

AC/DC adapter, DC12V 12W, AC100-240V 50/60Hz

8.00

PS-2415-DIN

23601

Power supply, DIN rail mount, DC24V 15W, AC85-264V 50/60Hz

11.00

CB-DB9MF-2M

21745

Serial Cable Assembly 1.8~2m, DB9 Male to DB9 Female

4.00

ENCL-DIN35-H2

23485

35mm DIN Rail Holder, Plastic

6.50

PRODUCT DOCUMENTS

TitleCategoriesFile TypeFile SizeLinkhf:doc_categorieshf:file_type
GT900 110 – 343 – 686 – User Manualpdf2 MBuser-manualpdf
GT900 110 – 343 – 686 – Datasheetpdf137 KBdatasheetpdf

YOU MIGHT ALSO NEED