USB/232 ISO is a communication converter intended for interconnecting industrial serial buses and devices with RS-232 connection to PC’s USB port.
Connecting this converter to PC additionally exceeds the capacity of RS-232 ports. Data rate and format adjustment is performed according to requirements of RS-232 device. Module is power supplied from USB port and galvanic isolated from RS-232 devices (network). It is compatible with most operating systems enabling two access modes: as virtual serial COM port (VCP drivers up to 115 kbps), and as direct USB port (D2XX drivers up to 1 Mb/s). Drivers are installed automatically, if for some reason drivers are not recognized you can download them here.
USB/232 ISO is completely adjusted for applications in industrial communications and process automation, alarm systems and telemetry.
It is used for:
- Interconnecting distributed I/O modules and PLCs to PC;
- Galvanic isolation of PC from RS-232 networks;
- Connecting PC without COM ports to RS-232 communication bus;
- Increasing number of COM ports on PC;
- Field data readout using laptop.
|Communication connectors||USB (type B); RS-232 (standard DB-9 male connector)|
|Compliance||USB 1.1 and USB 2.0 standard|
|Data rate and format||Automatically determined by RS-232 device|
|Maximum distance||20m @ 9600 b/s|
|Supported operating systems||Windows and Linux|
|Cable in set||USB cable (type A to type B) 1.5 m|
|LED indicators||ON, Tx, Rx|
|Galvanic isolation||1.5kV DC|
|Power supply||From USB port – no additional mains adapter is required|
|Operating temperature||-25 to 70°C|
|Dimensions||76 x 42 x 20 mm|
|USB/RS232 ISO||10225||RS232 interface converter for connecting RS232 devices to PC’s USB port.||€79|
*Minimum functionality kit needs to include the device and USB cable. Please note that all accessories are sold separately.
|CB-USBAB-2M||21473||USB Cable Type A/B 1.8~2m|
€2.00Add To Cart
|Serial Cable Assembly 1.8~2m, DB9 Male to DB9 Female|
€4.00Add To Cart