IDM 100



  • 2W full-duplex
  • Distance range up to 8 km
  • Transparent data rates from DC to 9600 bps
  • Point-to-point operation
  • Immunity to EMI/RFI interference
  • Built-in overvoltage protection up to 1500V





IDM100 is a private-line modem for asynchronous data transfer over a single dedicated pair of wires. It uses pure Frequency Shift Key modulation, providing transparent full-duplex communication at distances up to 6 km, or semi-duplex communication at distances up to 8 km. Modem is considered transparent regarding speed rate (from DC to 9600 bps), data structure and communication protocol. Opposite the short-haul base-band modems, IDM100 utilizes high frequency carrier and FSK modulation, thus increasing immunity to EM and RF interferences. This feature makes IDM100 reliable even in harsh industrial environments. IDM100 has an ability to communicate over any type of conductor pair: shielded, unshielded, twisted and untwisted. Communication is possible even over metal sections, like sliding contacts or crane bearers isolated from ground. In some cases, it is also possible to communicate over signal lines (4-20mA transducers lines). Two models are produced: for group 19" rack mounting, or individual mounting in DIN 35mm-rail enclosure, wall-mounted or bench type.


IDM100 FSK modem is used for interconnecting distant sites over 2W lines in industrial environment:

  • Interconnecting PLCs and SCADA terminals;
  • Connecting registration and alarm terminals to server;
  • Data transfer over existing signaling lines (4-20mA);
  • Interconnecting personal computers.

Best conditions of delivery and payment, as well as dealer discounts, can be obtained from our Sales Department. E-mail contact: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Please fill in the form and submit the data in order to purchase our product:


Line type 2W 150Ω balanced
Line connector RJ-11 and disjoinable screw clamp
Distance range Up to 6km full-duplex or 8km semi-duplex over 0.6mm conductors
Modulation Narrow band frequency shift keying (FSK), 100kHz/150kHz
Operating mode Point-to-point
Speed Transparent from DC to 9600 bps
DTE interface RS-232, DB9F (female)
LED indication PWR, TX, RX, CD
Power Supply 9-18 VDC, Mod. IDM 100-12
18-36 VDC, Mod. IDM 100-24
36-75 VDC, Mod. IDM 100-48
Supply connector Disjoinable screw clamp
Isolation Transformer up to 1500V
Overvoltage line protection Gas arrester
Operating temperature 0° to +60 °C
Mounting DIN rail 35mm or 3HE reck
IDM 100-xx-R Reck 19" model: PCB EUROPE format 160x100mm 3HE, 6T
IDM 100-xx-D Desk or DIN35mm model: aluminium enclousure 112x30x170mm