SMS Reporter

product image

Features

  • IndustrialGSM/SMS900/1800/1900 MHz telemetry device
  • Based onSimcom SIM900D module
  • Three different platforms based on number of inputs and outputs
  • 6/3/0* analog voltage/current inputs, 6/3/1* relay outputs with NO contacts and 8/4/1* optocoupler inputs (see table of hardware platforms)
  • 1/4/8 SMS numbers per input
  • RS232 DCE serial interface
  • Device setup via SMS messagees or via included PC software
  • Wide power supply range 8 to 30VDC
  • DIN 35mm rail mounting

 

Description


SMS Reporter is industrial GSM/SMS telemetry device which uses GSM network for transferring commands, alarms and data by using SMS messages.  It is based on Simcom SIM900D module. Standard RS232 connection enables simple device parameter setup over PC terminal with included PC software. Setup is possible also with SMS. Antenna is connected on female SMA 50Ω connector.. Device state is indicated by four LED diodes placed between SIM card slot and GSM antenna connectors Device has wide power supply range, from 8 to 30V DC and it is suitable for DIN 35mm rail mounting.


Application

SMS Reporter handles remote reading of analog and digital inputs and managing relay outputs by sending SMS message. Moreover, SMS reporter can be adjusted to send SMS messages on each state change of analogue and digital input. Each analogue and digital input has SMS table for 8 different SMS numbers. Analog inputs can be configurated to work as voltage or current inputs. Digital inputs and relay outputs are galvanicly isolated, allowing easy implementation into every system. Relay outputs have large current capacity, so they can be used to directly drive 220V consumers. Digital inputs can operate as counter inputs, whilst relay outputs can operate in pulse mode.

*TABLE OF HARDWARE PLATFORMS
Platform Relay outputs Optocoupler inputs Analog inputs
110 1 1 0
343 3 4 3
686 6 8 6

  

Best conditions of delivery and payment, as well as dealer discounts, can be obtained from our Sales Department. E-mail contact: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Please fill in the form and submit the data in order to purchase our product:


 



Technical specifications
GSM

SIMCOM SIM900D

Quad-Band GSM/GPRS 850/900/1800/1900 MHz

Compliant with GSM phase 2/2+ standard
Output power Class 4 (2W at 850/900MHz); Class 1 (1W at 1800/1900MHz)
SIM card Mini SIM, 1.8V/3.0V
Serial interface RS232 DCE configuration, DB9 female
Serial baud rate in command mode 9600 bps, 8N1
Analog inputs

6/3/0* inputs with conjoint bulk, with adjustable software:

- current inputs 0-20mA or 4-20mA

- voltage inputs 0-5V or 0-10V
Digital inputs

8/4/1* inputs with conjoint bulk, separated with optocouplers

Nominal 12V DC – 24V DC max 30V DC

Logic 0 – Input voltage < 4V DC

Logic 1  - Input voltage >5V DC

Counting mode: 0 - 65535 pulses
Relay outputs 6/3/1* relays with NO contacts, 5A, 30V DC / 250V AC
Antenna connector SMA female, GSM 50Ω antenna with 3m cable included
LED indication Power ON, GSM ON, Ready, Busy
Power supply DC power supply, from 8 to 30V
Power supply and I/O connectors Pluggable screw clamp, 2.5mm2
Power consumption Standby 0.2W, max 3W
Dimension 70 x 85 x 58 mm (without connection blocks)
Weight cca 150g
Protection IP40
Temperature range -20°C to +75°C, 0 to 95% RH (non condensed)
Mounting DIN 35mm rail

*see table of hardware platforms

 
GSM 

SIMCOM SIM900D

Quad-Band GSM/GPRS 850/900/1800/1900 MHz

Compliant with GSM phase 2/2+ standard

Output power

Class 4 (2W at 850/900MHz)

Class 1 (1W at 1800/1900MHz)

SIM card

Mini SIM, 1.8V/3.0V

Serial interface RS232

DCE configuration, DB9 female

Serial baud rate in command mode

9600 bps, 8N1

Analog inputs

6/3/0* inputs with conjoint bulk, with adjustable software:

- current inputs 0-20mA or 4-20mA

- voltage inputs 0-5V or 0-10V

Digital inputs

8/4/1* inputs with conjoint bulk, separated with optocouplers

Nominal 12V DC – 24V DC max 30V DC

Logic 0 – Input voltage < 4V DC

Logic 1  - Input voltage >5V DC

Counting mode: 0 - 65535 pulses

Relay outputs

6/3/1* relays with NO contacts, 5A, 30V DC / 250V AC

Antenna connector

SMA female, GSM 50 antenna with 3m cable included

LED indication

Power ON, GSM ON, Ready, Busy

Power supply

DC power supply, from 8 to 30V

Power supply connector

Pluggable screw clamp 5mm, 2.5mm2

Power consumption

Standby 0.2W, max 3W

Dimension

70 x 85 x 58 mm (without connection blocks)

Weight

cca 150g

Protection

IP40

Temperature range

-20°C to +75°C, 0 to 95% RH (non condensed)

Mounting

DIN 35mm rail